Ebora Online Tutorial Services
Reinforced & Prestressed Concrete · CE368
🧱 Rebar Schedule Scanner
📋 Rebar Schedule Scanner
Snap or upload a photo of a rebar schedule — a Bar Bending Schedule (BBS) or a beam / column reinforcement schedule — and EboraBot reads every row into an editable take-off table. It then computes the total length and mass per bar size plus the grand totals, so you can build your bar list in seconds. Add or fix rows by hand too — and download a clean PDF take-off report.
📷 Scan schedule · 8 EP per scan ·
Manual add-row, recompute & PDF are free · Balance … EP
1 · Scan a rebar schedule
💡 You can also paste a screenshot with Ctrl+V / ⌘V
📊 Bar take-off
Schedule title:
| Mark | Ø (mm) | Shape | Count | Length each (m) | Member | Total length (m) | Mass (kg) |
|---|
Mass per metre uses the nominal deformed-bar mass:
kg/m = 0.006165 × Ø² (Ø in mm). Row total length = count × length each;
row mass = total length × kg/m. Edit any cell and totals recompute instantly.
Summary — per bar size (Ø)
| Ø (mm) | Total bars | Total length (m) | Total mass (kg) |
|---|---|---|---|
| Grand total | 0 | 0.00 | 0.00 |
%
applied to mass
Grand total length
0.00 m
Total mass (steel)
0.00 kg
Mass incl. wastage
0.00 kg
Mass in tonnes
0.000 t
Sign in to use EP
Sign in to spend Ebora Points on this app.
Top up Ebora Points
1 EP = ₱1 · Minimum top-up 50 EP · Pay via GCash / Maya / Bank QRPh
📋
Before you scan a schedule
EboraBot reads your rebar / bar bending schedule photo and transcribes every row into an editable table. Heads up:
- Costs 8 EP per scan (the vision step reads the whole table).
- It can misread a number — a bar diameter, a quantity, or a cutting length can come out wrong, especially on faint or handwritten schedules.
- Take a straight, clear photo — angled, blurry, or shadowed tables confuse the reader. Crop to just the schedule.
- Always check every row before trusting the take-off. Every cell is editable, and you can add or delete rows for free.